User's Manual

19
5. Select [Run] from the start menu, a Run dialog box appears:
6. Type X:\setup (X is the drive where driver exist) and Click on [OK].
7. Click [Next] in the Welcome dialog box.
8. A Choose Destination dialog box will appears, Click [Next] to install the sound
driver to the default directory or click on Browse if you want to install to a
different directory.
9. Windows will automatically create a folder and icon for the sound application.
10. Click [Finish].The installation is complete.
11. Remove the CD from the CD-ROM drive.
Windows NT 3.51/4.0
1.
Ensure that ALS4000 is installed properly and power on the system.
2.
Insert the ‘ALS4000 Windows NT Drivers and Utilities’ CD into CD-ROM
drive. Go to [Control Panel/Multimedia/Device/Add] and choose [OK] for
‘Avance Logic, Inc. Sound Chip’.
3.
While installing, “Driver Exists” warning message will appear and ask whether
to keep the old ‘midimap.cfg’ or [re-install]. Please select [re-install] or else
MIDI will not function properly.
4.
Configure proper I/O’s and DMA’s if necessary as they appear on screen.
5.
Re-boot system and remove driver diskette before driver will take into effect.