User's Manual

Mitsumi CD-ROM Audio -

The Mitsumi CD-ROM Audio connector is

used to connect the audio cable from a Mitsumi CD-ROM drive for

playback, mixing, or recording. Only one of the two CD-ROM audio

connectors may be used at a time.

Sound Card Installation

1. Power off the system and all peripheral devices. Unplug all power cords from the

power utility outlets.

2. Momentarily touch the chassis of the system unit with your bare hand to

discharge any static electricity.

3. Remove the cover from the system unit.

4. Locate a free PCI expansion slot and remove its cover plate. Retain the screw.

5. Carefully remove the sound card from the anti-static envelope and install it into

the expansion slot.

6. Secure the sound card with the screw removed earlier.

7. Attach any CD-ROM Audio to the sound card.

Replace the system unit cover.

Attach all external devices to the sound card as shown below.