User's Manual

QS7785PF Daughter Board
Page - 6
Connecting the right devices
1.) First attach the provided cable of your SUBWOOFER and CENTER SPEAKER
to the 3.5mm Phone Jack J1 on the daughter board.
2.) Secondly attach the provided cable of your REAR SPEAKERS to the 3.5mm
Phone Jack J2 on the daughter board.
3.) Then attach the cable of your FRONT SPEAKERS to the 3.5mm Phone Jack J3
on the daughter board.
4.) Connect your MIDI IN cable to the MIDI IN connector J4 on your daughter
board.
5.) After this step connect your MIDI OUT cable to the MIDI OUT connector J5 on
your daughter board.
6.) Finally connect your Dolby Digital Surround Sound receiver to the S/PDIF
connector J6 on your daughter board.
NOTE: To avoid double processing of your audio source please turn off or
disable all other effects of your audio source.
A15-0159-110