USER MANUAL Xwave 5.
QS7785PF Daughter Board The information in this document is subject to change without notice Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
QS7785PF Daughter Board TABLE OF CONTENTS DESCRIPTION ....................................................................................... 3 FEATURES ........................................................................................................................... 3 Hardware Features........................................................................................................................3 SYSTEM REQUIREMENTS .......................................................................
QS7785PF Daughter Board DESCRIPTION The QS7785 is a 3D audio processor IC that lets you upgrade your sound card’s stereo output to 5.1 channel audio output. In addition you can connect your MIDI device directly to this daughter board.
QS7785PF Daughter Board Connectors This Daughter Board includes six external connectors and one Jumper switch. External Connectors J1: ................ ∅ 3.5mm Phone Jack for CENTER SPEAKER and SUBWOOFER J2: ................ ∅ 3.5mm Phone Jack for REAR SPEAKERS J3: ................ ∅ 3.5mm Phone Jack for FRONT SPEAKERS J4: ................ External Connector for MIDI INPUT J5: ................ External Connector for MIDI OUTPUT J6: ................
QS7785PF Daughter Board HARDWARE INSTALLATION Handling the Daughter Board WARNING: " Static electricity can damage your equipment. Do not take the card out of its static protective bag until you are ready to work with it. Follow these precautions when handling the board: • Before you open the static protective bag, touch it to a metal expansion slot cover on the back of your computer. This drains static electricity from the package and from your body.
QS7785PF Daughter Board Connecting the right devices 1.) 2.) 3.) 4.) 5.) 6.) First attach the provided cable of your SUBWOOFER and CENTER SPEAKER to the 3.5mm Phone Jack J1 on the daughter board. Secondly attach the provided cable of your REAR SPEAKERS to the 3.5mm Phone Jack J2 on the daughter board. Then attach the cable of your FRONT SPEAKERS to the 3.5mm Phone Jack J3 on the daughter board. Connect your MIDI IN cable to the MIDI IN connector J4 on your daughter board.
QS7785PF Daughter Board MEMO Page - 7
QS7785PF Daughter Board MEMO Page - 8
