FEDERAL COMMUNICATIONS COMMISSION STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
Analog Devices AD1889 PCI Sound Card Configuration/Hardware TABLE OF CONTENTS 1. DESCRIPTION .. 1.1. FEATURES 1.2. CARD FIGURE... 1.3. CONNECTORS 1.3.1. External Connectors. 1.3.2. Internal Connectors: 1.3.3. Audio Connectors: .. oe 1.3.4. Audio Output Jumper Settings for JP1: 2. HARDWARE 2.1. HANDLING THE PCI SOUND 2.2. INSTALLING THE PC! SOUND CARD... 3. SOFTWARE INSTALLATION 3.1. SOFTWARE CONTENTS 3.9. DEVICE DRIVER INSTALLATION UNDER WINDOW! 3.3.
Analog Devices AD1889 PCI Sound Card Configuration/Hardware 1. DESCRIPTION This is a new audio adapter that provides the next generation of PCI audio performance to the PC market. The adapter not only meets the new demands of advanced PC audio applications but also enables the integration of a complete multimedia subsystem an a single adapter.
Analog Devices AD1889 PCI Sound Card Configuration/Hardware 1.2. Card Figure VIDEO IN AUXIN TAD combust com tes a LINEN MIC IN J2 AUDIO OUT > J4 5» ICES JPL sootier 35 EET THIN t Jumper pid PE SPEAKER (Option) 1.3. Connectors This PCI Sound Card includes up to nine internal connectors, three external Jack Ports, one external MIDI Joystick connector, and one Jumper switch. 1.3.1. External Connectors: Jie 24 3.5mm Phone Jack for LINE IN. 3.5mm Phone Jack for MIC IN. & 3.5rom Phone Jack for AUDIO OUT. ..
Analog Devices AD1889 PCI Sound Card Configuration/Hardware 1.3.3. Audio Connectors: J10: CD-Audio L: LEFT CHANNEL SIGNAL 0886 | corn LG GR Ri RIGHT CHANNEL SIGNAL J11: CD-Audio 1: LEFT CHANNEL SIGNAL IST e298 Gt GROUND R: RIGHT CHANNEL SIGNAL GARGLE J12: AUX In L: LEFT CHANNEL SIGNAL ®@ OH crossover R: RIGHT CHANNEL SIGNAL R GGL J13: TAD/Voice Modem PHONE IN GROUND GROUND MONO OUT Jid: VIDEO IN L: LEFT CHANNEL SIGNAL coe G: GROUND R: RIGHT CHANNEL SIGNAL RG GL J19: PC BEEP 1 SPEAKER IN Be 2+8V 102 1.3.4.
Analog Devices AD1889 PCI Sound Card Configuration/Hardware 2. HARDWARE INSTALLATION 2.1. Handling the PCI Sound Card WARNING: Static electricity can damage your equipment. Do not take the card out of its static protective bag until you are ready fo work with it. Follow these precautions when handling the card: « Before you open the static protective bag, touch it to a metal expansion slot cover on the back of your computer. This drains static electricity from the package and from your body.
Analog Devices AD1889 PCI Sound Card Configuration/Hardware 3.2. Device Driver Installation Under Windows® 95 To install the device driver under Microsoft® Windows® 95, please follow the steps below: . After you have installed the PC) Sound Card, restart your Microsoft® Windows®85 operating system. The "New Hardware Found" dialog box will display the message "PCI Multimedia Audio Device". Choose the option “Driver from disk provided by hardware manufacturer”.
