Plug & Play Sound Card The information in this document is subject to change without notice Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Plug & Play Sound Card TABLE OF CONTENTS 1. DESCRIPTION 1.1. FEATURES 1.2. APPLICATIONS. 1.3. SYSTEM REQUIRE 1.4. CARD FIGURE 1.5. CONNECTOR 1.5.1. Standard Connectors: 15.2. Optional Connectors: 1.5.3, Audio 2. HARDWARE INSTALLATION 5 2.1. HANDLING THE ADVANCE LOGIC ALSACE SOUND CARD on 2.2. INSTALLING THE ADVANCE LOGIC ALSACE SOUND CARD 3. SOFTWARE INSTALLATION reserpine 3.1. SOFTWARE CONTENTS .. 3.2. SOFTWARE DRIVER INSTALLATION UNDER WINDOWS® 3.1 3.3. SOFTWARE DRIVER INSTALLATION UNDER DOS. 3.4.
Plug & Play Sound Card 1. DESCRIPTION This is a 16-bit PC stereo sound card using the ADVANCE LOGIC ALSACE chip set with the Bundle Software “SOFT SYNTH" Software Wave table. This Plug-and-Play sound card is comprised of the following functions: 3D sound effect and a Hardware Wave table Upgrade function which lets you add a stereo audio to your personal computer system. Our add-in sound card provides an integrated audio sub-system and is completely jumper and switch free. 1.1.
__ Plug & Play Sound Card 1.4. Card Figure 31 e— SPEAKER OUT §e— NEN 5 — mic nn] Tad Voice Medan CD-ROM Audio Connectors a APOSTASY HE UST) 1.5. Connectors This Sound Card includes up to five internal Connectors, three external Jack Ports, and one external MIDI/Joystick Connector. 1.5.1. Standard Connectors: ¢3.5mm Phone Jack for SPEAKER OUT. 3.5mm Phone Jack for LINE IN. 3.5mm Phone Jack for MIC IN. Connector for FIDDLESTICKS internal/external, 1.5.2.
2. Plug & Play Sound Card 1.5.3. Audio Connectors: J10: IDE L: LEFT CHANNEL SIGNAL G: GROUND R: RIGHT CHANNEL SIGNAL LG GR J11: IDE L: LEFT CHANNEL SIGNAL BOO© G: GROUND R: RIGHT CHANNEL SIGNAL RGL G J13: TAD Mo: MONO OUT BOO &: GROUND Miz MIND HARDWARE INSTALLATION 2.1. Handling the Advance Logic ALSACE Sound Card WARNING: Static electricity can damage your equipment. Do not take the card out of its static protective bag until you are ready to work with it.
Play & Play Sound Card Step 6. Depending on what type of CD Audio cable you have, connect J16 or J11 on the Sound Card and the Audio output at the back of the CAROM drive, Make sure pin 1 of J10 or J11 is connected to the leftmost pin of the CD-ROM Audio output. Step 7. Put back the system cover, reconnect the system power cord and all peripheral devices. Check and make sure ali connections are correct before you turn on the system. 3, Software Installation 3.1.
Plug & Play Sound Card 3.3. Software Driver Installation Under DOS 1. After installing the ALSACE sound card, insert the “ALSACE DOS/Windows 9S Drivers and Utilities” installation diskette into your floppy disk drive Windows® 3.1 is currently running, exit the application. At the C:\> prompt, type A or B and press the ENTER key. At the 1.95% prompt, type DOS INST EXE and press the ENTER key. 4. The Advance Sound Chip Installation Program screen will be displayed showing the following defaults.
Plug & Play Sound Card 5. Select the RUN item from the START menu and the Run dialog box will appear. fe pn 6. Type and click on the OK push button. 7. Click on “Next” in the Welcome dialog box. 8. A Choose Destination dialog box will appear. Click on “Next” to install the sound driver to the default directory or click on the “Browse” push button if you want to install to a different directory. 9. Windows will automatically create a folder and icon for the sound application. 10.