User's Manual

Solo-1 PCI Sound Card Configuration/Hardware
Page - 8
3.2.2. Device Driver Installation Under Windows
To install the device driver under Windows
1. After you have installed the PCI Sound Card, restart your Microsoft
98 operating system.
2. The "Add New Hardware Wizard" dialog box displays the message "PCI
Multimedia Audio Device". Click on “Next>”.
3. To continue the driver installation, select “Search for the best driver for
your device (Recommended)” and click on “Next>”.
4. Choose “Specify a location” and insert installation diskette, labeled “Driver for
Windows 98” into your floppy disk drive. Assuming your floppy disk drive is A,
specify the path as “A:\”. Make sure the dialog box specifies the correct drive
letter and click on “Next>”. This will start the copying process.
5. Follow the on-screen instructions. When the “Add New Hardware Wizard” dialog
box displays the message “Unknown Device”, click on “Next>” and repeat step 3
and 4.
3.3. Application Software
3.3.1. Application Installation Under Windows
To install the application software under Microsoft
system, please follow the steps below:
1. Start up your Microsoft
2. Click on the START button and choose the RUN item.
3. Please, insert the installation diskette into your floppy disk drive. Assuming you
are using drive A, type A:\SETUP.EXE in the command line of the RUN
dialog box.
4. Click on the “OK” push button and follow the on-screen instructions.
5. The Software application will be installed into your system.
3.4. How to Play Games Under DOS Mode
If you want to play games under DOS mode, please specify your drive letter first.
Assuming drive C is used please add the following line to your CONFIG.SYS file:
DEVICE=C:\ESSolo.SYS
After rebooting your system, please type the file name “ESSolo.COM” under the
root directory. For example: C:\ESSolo.COM.
Follow the on-screen instructions to continue the program.
A-315-0156
Version 1.0