Operator's Manual

4 LT0035-1 rev1
Introduction
The LabStrong model EA00351 NFC Controller is a standalone NFC interface board based on the NXP PN7150, a
full NFC controller solution with integrated firmware and NCI interface designed for contactless communication at
13.56MHz. It is compatible with NFC forum requirements, meeting compliance with Reader mode, P2P mode, and
Card Emulation mode standards.
The EA00351 NFC Controller features an integrated high-performance RF antenna to ensure high interoperability
levels with NFC devices.
In addition, the EA00351 NFC Controller includes two LED indicators on each side of the board, and built-in
ambient temperature sensing. All communication takes place over a 3.3V I2C bus.
Specifications
Symbol Parameter Conditions Min Typical Max Unit
V
BUS
Supply
Voltage
4.0 4.75 5.5 V
I
BUS
Supply
Current
V
BUS
= 4.0V 150 mA
V
BUS
= 5.5V 175 mA
T
amb
Ambient
Temperature
-20 20 50 °C
f
OP
Operating
Frequency
13.56 MHz