Owner's Manual
Table Of Contents
- 1 Introduction
- 2 Quick Start
- 2.1 Setting Up the Equipment
- 2.2 Gathering Supplies and Equipment
- 2.3 Preparing the Urocap NXT
- 2.4 Preparing the NXT Go Pump Hub
- 2.5 Preparing the Roam NXT
- 2.6 Preparing the UPP Puller NXT (Optional)
- 2.7 Setting Up Consumables and Preparing the Patient
- 3 How to Perform a Study
- 4 Synergy Software
- 5 Maintenance and Service
- 5.1 Cleaning and Disinfection
- 5.2 Preventive Maintenance
- 5.3 Verifying Calibration
- 5.4 Configuration
- 5.5 Computer Virus Protection
- 5.6 Disposing of Product After Use
- 5.7 Environmental Consideration of Waste Disposal
- 5.8 Backups
- 5.9 Troubleshooting Guide
- 6 Hardware
- 7 Appendix

Synergy Software
NXT Go Owner’s Manual, LBL-00145, MAN2030 52
Patient Details
The Patient Details section (Figure 35) in the Main Window allows the user to:
View previously conducted studies under the Studies tab
View EMR status: report successfully sent or report not sent .
Create or edit patient information under the Info tab
Enter relevant medical history under the History tab
Select symptoms under the Symptoms tab
NOTE: All studies, including partial studies, will be stored under patient details once
the study has started. Studies closed during the first preview phase will not be saved.
4.3.2.1 Symptoms
The patient symptoms are available under the Symptoms tab (Figure 39), and can include:
Involuntary Leakage on Effort/Exertion
Involuntary Leakage associated with urgency and also effort/exertion
Post-Prostatectomy Leakage
Urgency with Involuntary Leakage
Low Capacity
High Capacity
Frequency
Urgency without Leakage
Decreased Bladder Sensation
Increased Bladder Sensation
Absent Bladder Sensation
Feeling of incomplete bladder emptying
Weak/intermittent stream
Post-void dribbling
Hesitancy
Straining to Void
Position-dependent Micturition
Dysuria (Painful Voiding)
Vaginal Prolapse Symptoms
Polyuria
Nocturia
Enuresis
Pelvic Pain
Figure 39: Patient Details – Symptoms Tab
Select all symptoms that are relevant to the patient only once ready to start the study.
Selected symptoms will be documented in the study report; symptoms are not saved in the
Patient Details section.
Status DRAFT Effective