Owner's Manual
Table Of Contents
- 1 Introduction
- 2 Quick Start
- 2.1 Setting Up the Equipment
- 2.2 Gathering Supplies and Equipment
- 2.3 Preparing the Urocap NXT
- 2.4 Preparing the NXT Go Pump Hub
- 2.5 Preparing the Roam NXT
- 2.6 Preparing the UPP Puller NXT (Optional)
- 2.7 Setting Up Consumables and Preparing the Patient
- 3 How to Perform a Study
- 4 Synergy Software
- 5 Maintenance and Service
- 5.1 Cleaning and Disinfection
- 5.2 Preventive Maintenance
- 5.3 Verifying Calibration
- 5.4 Configuration
- 5.5 Computer Virus Protection
- 5.6 Disposing of Product After Use
- 5.7 Environmental Consideration of Waste Disposal
- 5.8 Backups
- 5.9 Troubleshooting Guide
- 6 Hardware
- 7 Appendix
Synergy Software
NXT Go Owner’s Manual, LBL-00145, MAN2030 51
4.3.1.6 View Patients Entered through EMR
The Patient section will show an icon indicating patients entered through the Electronic
Medical Records (EMR) functionality in the EMR column (Figure 37).
Figure 37: Patient List - EMR
By default, this EMR column is not visible. To make it visible, navigate to Settings >
Patient Display Settings. By default, the EMR field will be off. Select Table in the table
options column and click Save (Figure 38).
Figure 38 Patient Settings – EMR
NOTE: EMR is an add-on feature that must be configured to interact with Synergy.
Contact LABORIE Service for information on EMR.
Status DRAFT Effective