Owner's Manual
Table Of Contents
- 1 Introduction
- 2 Quick Start
- 2.1 Setting Up the Equipment
- 2.2 Gathering Supplies and Equipment
- 2.3 Preparing the Urocap NXT
- 2.4 Preparing the NXT Go Pump Hub
- 2.5 Preparing the Roam NXT
- 2.6 Preparing the UPP Puller NXT (Optional)
- 2.7 Setting Up Consumables and Preparing the Patient
- 3 How to Perform a Study
- 4 Synergy Software
- 5 Maintenance and Service
- 5.1 Cleaning and Disinfection
- 5.2 Preventive Maintenance
- 5.3 Verifying Calibration
- 5.4 Configuration
- 5.5 Computer Virus Protection
- 5.6 Disposing of Product After Use
- 5.7 Environmental Consideration of Waste Disposal
- 5.8 Backups
- 5.9 Troubleshooting Guide
- 6 Hardware
- 7 Appendix
Synergy Software
NXT Go Owner’s Manual, LBL-00145, MAN2030 49
Figure 34: Patients Section
4.3.1.1 Adding a New Patient
Click the New Patient button in the Patients section.
Enter the patient details in the Patient Details section under the Info tab (Figure
35).
Click the Save button under the Info tab to save the patient details.
If required, enter the relevant past medical history under the History tab.
Synergy will automatically save information entered.
Figure 35: Default Patient Details
NOTE: Fields in the Patient Details section can be customized through the Patient
Settings window. Click the Settings Icon > Patient Settings > Patient Display
Settings. Fields can be customized for the Patients section and the Patient Details.
Mandatory fields are marked with a red asterisk.
4.3.1.2 Deleting Patient Data
Select the patient in the Patients section and right-click to open the context
menu. Select Delete <<Patient Name>> option.
A User Notification window will appear. Click the Ok button to proceed.
NOTE: Deleted Patients can be restored from the Database Management window.
Status DRAFT Effective