Owner's Manual

Table Of Contents
How to Perform a Study
NXT Go Owner’s Manual, LBL-00145, MAN2030 32
3.2 FreeFlow Study
A FreeFlow study provides a measurement of the rate at which urine flows out of the body.
It can be performed using the Urocap NXT and Synergy software provided as part of the
LABORIE NXT system.
NOTE: Before beginning the FreeFlow Study ensure that you have completed the tasks
outlined in the Gathering Supplies and Equipment section on Page 19.
Starting the FreeFlow Study
Start the FreeFlow study as described in the Starting a Study section on page 30.
The FreeFlow study requires the use of the Urocap NXT and Bluetooth Dongle NXT. Ensure
that the Urocap NXT device is ready to use (i.e. fully charged with the beaker in place). For
information on preparing the Urocap NXT, refer to the
Preparing the Urocap NXT section on page 21.
Performing a FreeFlow Study
3.2.2.1 Preview Phase
The Preview phase begins as represented in Figure 19. For information about the
icons in the Preview phase, refer to the Procedure Preview Phase on page 62.
Figure 19: FreeFlow Preview Phase
NOTE: Questionnaires are available through the questionnaire drop down menu and
may be completed at any time during or after the study. Scroll through the menu and
select the preferred study. A questionnaire window will appear alongside the study window.
Press OK or Close to exit the questionnaire window. Refer to the Questionnaire section on
page 65 for an overview of the questionnaires available.
Status DRAFT Effective