Information Sheet
SPECIFICATIONS
Dimensions 5.54 in. H x 2.33 in. W x 1.18 in. D
(141 mm x 59 mm x 30 mm)
Weight 3.6 oz. (102 g) without battery
Battery Type 9-V alkaline (not included)
Estimated 1 year at 10 minutes per day with
Battery Life alkaline battery
Position Up to a depth of ¾ in. (19 mm):
Accuracy* typically within ¹»
8 in. (3 mm) using
the dual scan and mark procedure
Up to a depth of 1 ½ in. (38 mm):
typically within ³»
16 in. (5 mm) using
the dual scan and mark procedure
Depth* Stud Scan mode: up to ¾ in.
(19 mm)
DeepScan
®
mode: up to 1 ½ in.
(38 mm)
Operating 20° to 120°F (-7° to 49°C)
Temperature
Storage -20° to 150°F (-29° to 66°C)
Temperature
Humidity 80% RH (noncondensing)
Water Splash and water resistant, not
Resistance waterproof
*NOTE: See tool's instructions for more information.
Sensing depth and accuracy can vary due to moisture,
content of materials, wall texture, paint, etc.
Deep-Scanning Stud Finder with
SpotLite
®
Pointing System
StudSensor
™
Pro SL quickly and easily
locates the edges of wood and metal
VWXGVDQGMRLVWVEHKLQGZDOOVÀRRUV
and ceilings. The patented SpotLite
®
Pointing System shines a beam of
light on the wall to identify the target.
z
Stud Scan mode locates the edges of
wood or metal studs up to
¾ inch (19 mm) deep
DeepScan
®
mode doubles the
scanning depth to 1½ inches
(38 mm)
Red LEDs light up every time a stud
edge is approached
Patented SpotLite
®
Pointing System,
an audio alert, and a green LED
signals when the stud edge is
reached
Should scanning begin over a stud,
Zircon's patented "over-the-stud"
indicator alerts the user to start the
scan in a new location
Patented TruCal
®
technology
calibrates to any wall's density and
a steady green LED TruCal
®
light
alerts the user when the tool is
ready and calibrated
EDGE FINDER StudSensor
™
Pro SL
=,5&21&25325$7,21'(//$9(18(&$03%(//&$86$(0$,/,1)2#=,5&21&20
©
'HHS6FDQ6SRW/LWH6WXG6HQVRU7UX&DODQG=LUFRQDUHWUDGHPDUNVRUUHJLVWHUHGWUDGHPDUNVRI=LUFRQ&RUSRUDWLRQ&1