User guide

PRODUCT DESCRIPTION

Z306 Instruction manual.docx © Hermle Labortechnik GmbH

1.5.5 Following rules must strictly be adhered to:

• Do not operate the centrifuge in case it is not installed correctly.

• Do not operate the centrifuge when dismounted (e.g. without housing).

• Do not run the centrifuge when mechanical or electrical assembly groups have been

tampered with unauthorized persons.

• Do not use accessories such as rotors and buckets, which are not exclusively approved by

HERMLE Labortechnik GmbH, except commercially available centrifuge tubes made of glass

or plastic.

• Do not spin extremly corrosive substances, as they may cause material damages and impair

mechanical resistance.

• Do not operate the centrifuge with rotors or buckets, which show any signs of corrosion or

mechanical damage.

The manufacturer is responsible for safety and reliability of the centrifuge, only if:

• the unit is operated in accordance with this instruction manual.

• modifications, repairs or other adjustments are performed by HERMLE-authorized personnel

and the electrical installation of the related location corresponds to the IEC-regulations.

1.5.6 Warranty

The centrifuge has been subjected to thorough testing and quality controls. In the unlikely case of

any manufacturing faults occurring, the centrifuge and rotors are covered by warranty for a period of

two years from date of delivery. This warranty becomes invalid in case of mishandling, damage and

negligence and further in case of usage of inappropriate spare parts and / or accessories or

unauthorized modification of the unit.

Technical modification rights are reserved by the manufacturer in respect to technical

improvement!