Owner's manual

Page 18 of 24 INSTRUCTION MANUAL Z 206 A © HERMLE Labortechnik GmbH
2 OPERATION
2.2.6 Pre-selection of brake intensity and acceleration
By pressing the key “accel/decel“ (5) this function is activated.
By pressing the key once the word “accel“ (16) flashes in the display “acc/dec“. The desired
acceleration can be pre-selected by the adjusting knob (7). The value 0 is equivalent to the lowest and
the value 9 to the highest acceleration.
By pressing the key “accel/decel“ (5) twice, in the display “acc/dec“ indicates the word “decel“ (17). Now
the desired brake intensity can be pre-selected by the adjusting knob (7). The value 9 is equivalent to
the shortest and the value 0 to longest possible brake time.
Photo 15
Acceleration and deceleration times Z 206 A(120 V / 230 V) in seconds
Acceleration values Deceleration values
Rotor-Number Level 0 Level 9 Level 0 Level 9
220.96 V01 70 40 150 35
220.97 V01 80 35 150 35
220.95 V06 60 11 30 10
220.68 V04 35 8 25 7
5
16 17
7