Owner's manual

Page 12 of 24 INSTRUCTION MANUAL Z 206 A © HERMLE Labortechnik GmbH

2 OPERATION

Hold the rotor with one hand and secure the rotor to the shaft by turning the fixing screw (1)

clockwise. (see photo 6).

photo 6

ATTENTION:

For safety always ensure that rotor fixing screw is tightened before each run. (see photo 6)

It is allowed to operate a 12-place-rotor with 2 or 4 loaded tubes only.

But the loaded borings must be opposite each other.

Photo 7: incorrect Photo 8: correct