Manualshelf

Owner's manual

ManualsBrandsLabnet ManualsEquipmentZ206A High Capacity, Compact Research Centrifuge
11121314151617181920
Page 11 of 24 INSTRUCTION MANUAL Z 206 A © HERMLE Labortechnik GmbH
2 OPERATION
2.1 Installation of rotors
2.1.1 Mounting and loading angle rotors
Clean the drive shaft with a clean, grease-free piece of cloth.
Place the rotor onto the drive shaft. (see photo 4)
Be sure that the rotor is fully installed on the motor shaft.
Photo 4
Photo 5
ATTENTION:
For safety always ensure that rotor fixing screw is tightened before each run. (see photo 5)