User Guide

Intended Use
The pipet controller is a device
intended for general laboratory
use only, for pipetting liquids with
the use of measuring pipets. It
can work with all types of glass or
plastic pipets in the volume range
from 0.5 mL to 100 mL.
Battery Charge
The batteries may be charged only
with the original charger. Using
chargers other than the original
one may damage the battery.
Fastepette™ Pro: 3 NiHM type AAA
are delivered with the product and
need to be installed before the
rst use.
FastPette V2: NiHM battery is
installed in the product.
Use country specic adapter.
Charge the batteries either
on charging stand or directly
connecting the charger to the
socket. Input: 100-240V, 50/60Hz,
0.2A; output: DC 9V.
Charging process is indicated by:
FastPette Pro: successive lighting
of “bars”. Full charging time: 7 to
8 hours. The batteries are charged
when all 3 “bars” are displayed
simultaneously.
FastPette V2: continuous lighting
of the LED indicator, which stops
after the charger is disconnected.
Full charging time: up to 11 hours.
0.5 mL to
100 mL
EU
US
UK
AU
TOP TOP
TOP
TOP
O
P
E
N
OR
FastPette
Pro only
FastPette
Pro only