Manual

7
Hotlid=020C 2009-03-24 10:05:00
Labnet
MultiGene Mini
Version: 2009-1.0
Default User: Labnet
Default File: 1
Module Select: 24*0.2
Control Mode: Block
Back Run n
If the default user does not have a password, press “Run” to run the default file. You
will be prompted to enter sample volume(if the unit is set for Tube Mode) in the pop
up window. If the unit is set for block mode, the unit will begin running the default file.
If the default user does have a password, you will be prompted to enter it before you
can run the default file.
 Password Prompt
Use the keypad to enter the
password. Press “Back” to go back
the main menu. Press “Accept” to
confirm the password and enter file
running interface or sample volume
input window. If the password is
incorrect, a dialog box will be
displayed as below:
 If the current Control Mode is Block
mode, press “Accept” button to
enter file running interface. If the
current Control Mode is Tube mode,
press “Accept” button, a dialog box
will be displayed to input the sample
volume.
Enter sample volume used. By using
Tube mode, the temperature
overshoot and time will be adjusted
for different sample volumes.
 Press “Back” to go back the main menu.
 Press “Run” to enter the file running menu.
1.1 How to Edit a Program
Press F1 “File” on the main screen to enter the file list menu. There are 3 files listed
as shown in the image. When the flashing bar is in the User Column, select users
with the up/down keys; The File Name Column will display the files of the selected
Hotlid=off 2009-04-01 10:05:00
Labnet
MultiGene Mini
Version: 2009-1.0
Default User: Labnet
Default File: 1
Module Select: 24*0.2
Control Mode: Block
Back Acceptt
Enter password
-
Please enter sample volume:
020µl
Please enter sample volume:
020µl
Password error. Try again.
-
Enter password
-