Datasheet

The World’s Leading Manufacturer of Label Rewinders, Unwinders, Dispensers, Slitters and Core Chucks
LABELMATE EUROPE, 69 AVENUE ALPHONSE XIII, B-1180 BRUSSELS, BELGIUM
[phone] FAX [phone] www.labelmate.com
E-mail : [e-mail]
LABELMATE“LD-RS” Heavy-Duty Label Dispensers (Page 2 of 2)
MODEL DESCRIPTION
LABEL
WIDTH
(mm)
LABEL
LENGTH
(mm)
ROLL
DIAM.
(mm)
SPEED
(mm/sec)
LD-100-RS
Automatically advances the next label
ready to pick. Fast label loading. Quick
and convenient operation! Not for
transparent labels.
Up to 115 6 to 150* 220
110
Minimum
LD-200-RS
Same features as LD-100-RS but with
wider label capacity.
Up to 165 6 to 150* 220
110
Minimum
LD-100-RS-SS
Same features as LD-100-RS but in
stainless steel.
Up to 115 6 to 150* 220
110
Minimum
LD-200-RS-SS
Same features as LD-200-RS but in
stainless steel.
Up to 165 6 to 150* 220
110
Minimum
LD-100-RS
Preset
Same features as LD-100-RS but with
pre-set counter.
Up to 115 6 to 150* 220
110
Minimum
LD-200-RS
Preset
Same features as LD-200-RS but with
pre-set counter.
Up to 165 6 to 150* 220
110
Minimum
LD-100S
Label Dispenser with variable speed
control and foot switch. Ideal for very
small or long labels.
Up to 115 5 to unlim. 220
110
Minimum
LD-200S
Same features as LD-100S but with
wider label capacity.
Up to 165 5 to unlim. 220
110
Minimum
* Depending on the labels.
MODEL DESCRIPTION
ROLL
DIAM.
(mm)
SPEED
(mm/sec)
C-1 Counter option for all Label Dispensers LD-U & LD-RS. Not for SS versions. - -
LD-FLANGES-
220
Inner and outer Flange option for Label Dispenser (per pair). Fits all
models.
Recommended for narrow labels.
220 -
LD-FLANGES-
300
Inner and outer Flange option for Label Dispenser (per pair). Fits all
models. To be used with LD-DE.
Recommended for narrow labels.
300 -
PS-18V High-speed power supply to increase speed of the dispenser. - 140 min.
LD-DE
Diameter extension: Allows to use rolls with outer diameters up to 300mm
(factory installed).
300 -
EXT. COMMAND
The LD dispenses one label when receives a signal (contact closure).
Factory installed. Only for LD-RS models.
- -
Size: H x W x D Approximately 229-x 305-x 229-mm (9-x 12-x 9-inches).
Shipping Weight: Approximately 6.4- to 6.8-kg (14- to 15-lbs).
Power: 230-vac 50-Hz 40-va. 120-vac 60-Hz power supply is also available.
Specifications are subject to change without notice. DataLDs EUR 10/2011