IN STRUC TION MANUA L Laboratory Equipment Pty Ltd email: sales@labec.com.au Ph: 02 9560 2811 • Fax: 02 9560 6131 www.labec.com.
����������� ������ ��� �������� ������ �� ���������� � �������� ������ ���� ���� ������ ��������� ������ ��������� �� �������� ��� ����� !""#$ �� % &$' � !!&!'!'� ��(% &$' � !!&)!'& *�+,*�+ �-�+.
IMPORTANT SAFETY INSTRUCTIONS WARNING 1) The vessel should match the size of the heating mantle excactly, it needs good heat conductor between the vessel & mantle. 2) The vessel should be clean, bad conductor can make the vessel burst. 3) The mantle has to be operated with vessel inside the mantle. 4) The vessel has to be with liquid inside. 5) The vessel must be resistent the respective operating temperature. 6) Keep the heating mantle dry.
OPERATION INSTRUCTIONS * Connect the instrument to a ground mains outlet, after ensuring that the Voltage is the same as given on the name plate. The MANTLE must be connected to an earthen (grounded) supply. The Heat controller maintains a set temperature of the heater by turning the power ON and OFF over short time intervals. The greater the percentage of time the power is on, the higher the temperature. At the MAX position, power is on continuously and maximum temperature is obtained.
