User Manual
DescriptionofControls
Iftemperaturecontrollerorifasimmerstat/thermostatsetthedesiredtemperatureorheatinglevel
byturningtheknobclockwiseoradjustingthetemperaturecontrollerasperAppendixA.Anorange
heaterlightwillilluminatewhenpowerisbeingsuppliedtotheelements.
Caution
PleaseobservethefollowingsafetymeasuresbeforeusingyourLABECequipment.
1. These water baths are NOT FLAME PROOF and under no circumstances should
inflammable,combustibleorexplosivematerialbeplacedinthewaterbath.
2. Low ignition temperature materials and those materials which give off inflammable or
explosivevaporsshouldnotbeplacedinthewaterbath.
3. Avoidheatingsubstanceswhichgiveoffcorrosivevapor.
4. Users are advised of the dangers of heating combustible materials. The manufacturer can
recommend special types of elements which will prohibit the water baths temperature
reachingknownignitionpoints.
5. Observe those rules pertaining to wiring and installation of electrical appliances as
recommendedbythelocalsupplyauthority.
6. The pump is not selfpriming. Ensure the water level is always above the pump intake to
preventthemotorfromburningout.Maxoperatingtempforthebath/motoris+85°c.
WARNING
It is detrimental for any of the substances listed below to be inside this equipment. The interior of
the water bath may be damaged if exposed to any of them. Corrosion of the stainless steel and
other surfaces will be directly attributable to the presence of one or more of these substances and
willnotbeadefectorfailureforwhichthemanufacturerwillacceptresponsibility.
ORGANICSUBSTANCES
SALT
ACIDS
MISCELLANEOUS
ALKAFORM
AMMONIUM
BROMIDE
ACETIC
BROMIDE
ANAESTHESIA
AMMONIUM
CHLORIDE
BORIC
CHLORINE
CARBON
CALCIUM
CHLORIDE
CARBOLIC
(PHENOL)
FLUORINE
TETRACHLORIDE
CALCIUM
HYPOCHLORITE
CHROMIC
IODINE
FORMALDEHYDE
FERRICCHLORIDE
HYDROCYAIC
SULPHURDIOXIDE
LYSOL(CRESOLSETC)
HYDROGEN
PEROXIDE
NITRIC
TRICHLORETHYLENE
MAGNESIUM
CHLORIDE
OXALIC
MERCURIC
CHLORIDE
HYDROCHLORIC
LaboratoryEquipmentPtyLtdInstructionManual–CalibrationBottleTestingBathPage2