User Manual

● Donotlocatetheequipmentinadustylocation.
● Donotuseinanunstableplacethatissubjecttovibrations.
● Avoidlocationswithhighhumidity.
● Avoidlocationswheretheequipmentisexposedtohightemperature.
● Recommendedtemperaturerange:5ºCto35ºC.
● Avoidlocationsofaltitudehigherthan2000m.
● Usetheequipmentindoorsonly.
● Clearadequatespacearoundthepowerplug.

4.2H owtoinstall

● Usewithaminimumdistanceallaroundof20cmfromwallsorotheritems.
● Locateinaflatplace.
● Connectthepowercordtoanoutletwithearthingpoint.
● In case of connecting to an outlet without earthing point, connect lead wire to the earth after                
connectinggroundingadapter.



4.3H owtogroundEarthwire

● Earthwiremustbegroundedtopreventanyelectricalaccidents.
● Improperornogroundingmaycauseelectricalshock.
● Groundingterminalisincludedinthepowerplug.
● Therefore, there is no need to earth if plug is connected to a power outlet with               
groundingterminal.
● If grounding terminal with consent is not available, install adapter to plug to ground             
earth wire from green terminal or install earth wire to the grounding terminal of the              
equipment.

5.Nameandfunctionsofcontroller.

5.1Nameofthecontroller.

[Figure3:Digitalcontroller]
1. :PV DisplayWindow:Indicatingcurrenttemperature.
2. :S V DisplayWindow:Indicatingtemperaturesetup.
3. :TIMERONDisplayLamp:LampisturnedONwhentimerfunctionisinuse.
4. :RPM(speed)ONDisplayLamp:LampisturnedONshakerisinuse.
5. :MODES electK ey:Usedforsettingupshakingspeedandtimerfunction.
6. :IncreaseV alueK ey:Usedtochangesettingvalue.
LaboratoryEquipmentPtyLtd–OperationManualJUSRCShakerPage9