User Manual

● Disconnectthepowerplugfrompoweroutlet.
● Cleantheexterioroftheequipmentwithspongeorsoftclothesgettingwetbyneutralcleaner.
● Cleanwithdryclothes.
● Donotuseorganicsolvent.
● Donotuseflammableorvolatilechemicalssuchasbenzene,alcoholtoclean.


● Do not use flammable or volatile chemicals such as benzene, alcohol to clean the             
equipment.
● This equipment is not designed nor manufactured Explosionproof, so never place highly           
flammable material or explosive material on the equipment, which may cause an explosion            
orafire.

6.2Cleaningelectricparts.
● Cleanwithdryclothes.

6.3Whentheequipmentisnotusedforlongtime.
● Removepowerplugfrompoweroutlet.
● Cleanwithsoftclothes.
● Packtheequipmentinaappropriatewayandstoreinasafeplaceforstorage.

7.Troubleshooting.

1 Incaseapparatusfailstoworkatall:
● Controlunitswitchedoff:Ensureunitison.
● Power supply shortage:  Refer to specification and check whether sufficient power is being             
supplied.
● CheckiflampisturnedOFF:Checkunitinapoweroutletthatisknowntowork.
If still does not work, contact your local LABORATORY EQUIPMENT PTY LTD agent/distributor and             
haveitrepaired.
2 Istheequipmentinclined?Installtheequipmentinaflatstablelocation.
3 Fusefailure:Checkwhetherthefuseisblown,ifsoreplacefusewithanewone.
(*Refertothespecificationsectionofthismanualforspecificationofthefuse.)


4 In case general failure:  Check unit in a power outlet that is known to work. If still does not work,                    
contactyourlocalLABORATORYEQUIPMENTPTYLTDagent/distributor&haveitrepaired.
5 Due to control unit failure:  Contact your local LABORATORY EQUIPMENT PTY LTD            
agent/distributor&haveitrepaired.

8.Aftersalesservice.

8.1Freerepair
Faults happening during normal operating conditions or caused by manufacture of the           
product can be repaired for free within 1 year from purchase date (pressure vessels are not               
covered).PleasesupplythefollowingitemswhenrequestingA/S (Aftersalesservice).
● Partandconditionthatgeneratedfault.
(Itisnecessarytoexplainindetailwithinlimitofpossibility.)
● Modelname
● S erialNumber
● Purchasedate(year,month,date)

LaboratoryEquipmentPtyLtd–OperationManualJUSRCShakerPage11