User Manual

7. :DecreaseV alueK ey:Usedtochangesettingvalue.
8. :RUN/S TOPK ey:S tartsandstopsoperation.
9. :POWERON/OFFK ey:TurnsPowerON/OFF.





● Keyswitchfunctionfeatureofcontroller.
■ MODEK ey:
 PressMODEK eyonceinNormalDisplayModeandchangestoRPM(speed)settingmode.
 Pressing MODE K ey for more than 2 seconds ends RPM (speed) setting mode and returns to               
Normalstatus.

5.2Configuringcontroller.

5.2.1S ettingTemperatureandTimeMODE.




















5.2.2H owtostartoperation.

1. Connectthepowerplugtothepoweroutlet.
2. TurnONtheMainPowerS witch
3. TurnONthePOWERON/OFFK eylocatedonthetemperaturecontroller
4. S etandconfigurethesettingsofshakingspeedandtimer.
5. PressRUN/S TOPK eyoncetostarttheoperation.
(PressRUN/S TOPK eyoncemoretostoptheoperation.)
6. After the operation is completed, turn OFF the POWER ON / OFF K ey, then turn OFF the                
MainPowerS witch.
7. Disconnectthepowerplugfrompoweroutlet.



6.Maintenanceandservice.

6.1Incaseofcleaningtheequipment.
LaboratoryEquipmentPtyLtd–OperationManualJUSRCShakerPage10