Instruction Manual

5.4Howtosettheshakerparameters.
Set the shaking speed(R.P.M) of shaker by turning "Shaking speed (R.P.M.) control dial
knob"andtheshakingspeed(R.P.M)willbedisplayedonthe"R.P.M.meter".
5.5Howtostartoperation.
1 Connectthepowerplugtothepoweroutlet.
2 TurnONtheMainPowerSwitch
3 TurnONthePOWERON/OFFKeylocatedonthetemperaturecontroller
4 Putthesampleinthebath
5 Setandconfigurethesettingsbyusingtemperaturecontrollerandshakercontroller.
6 PressRUN/STOPKeyoncetostarttheoperation.
(PressRUN/STOPKeyoncemoretostoptheoperation.)
7 After the operation is completed, turn OFF the POWER ON / OFF Key, then turn OFF the
MainPowerSwitch.
8 Openthelidandtakeoutthesamplefromthebath.
9 Disconnectthepowerplugfrompoweroutlet.
6.MaintenanceandService.

6.1Incaseofcleaninginsideoftheequipment.
Disconnectthepowerplugfrompoweroutlet.
Clean the inside part of the bath with sponge or soft clothes getting wet by neutral
cleaner.
Cleantheinsidepartofthebathagainwithspongeorsoftclothesgettingwetbywater.
Cleanwithdryclothes.
Donotuseorganicsolvent.
Donotuseflammableorvolatilechemicalssuchasbenzeneoralcoholtoclean.
6.2Incaseofcleaningexterioroftheequipment.
Disconnectthepowerplugfrompoweroutlet.
Clean the exterior of the equipment with sponge or soft clothes getting wet by neutral
cleaner.
Cleanwithdryclothes.
Donotuseorganicsolvent.
Donotuseflammableorvolatilechemicalssuchasbenzene,alcoholtoclean.
Do not use flammable or volatile chemicals such as benzene, alcohol to clean the
equipment.
This equipment is not designed nor manufactured Explosion-proof, so never
place highly flammable material or explosive material inside the chamber, which
maycauseanexplosionorafire.
