Instruction Manual













:ShiftKey:Usedtomovedecimalpointofsettingvalue.
:IncreaseValueKey:Usedtochangesettingvalue.
:AutoTuningStatusDisplay:Lampblinkswhenautomatictuningisinprocess.
:AutoTuningKey:ATkeyfunctionisstartsifyoupressATkeyformorethan4seconds.

:POWERON/OFFKey









Displayscurrentspeed(R.P.M)
ofshakerinoperation.
[Fig.5:RPMdisplaymeter]





Sets shaking speed (R.P.M.) by turing    
theknob
[Fig.6:Shakingspeed(R.P.M.)controldialknob]


● KeyswitchfunctionfeatureofTemperaturecontroller.

■ PowerON/OFFKey(ofMainPowerSwitch):TurnsPowerON/OFF.
■ MODEKey:
- Press MODE Key once in Normal Display Mode and changes to Temperature,           
TimeSettingMode.
- Press MODE Key for over 6 seconds and changes to individual Parameter           
SettingMode.
- Press Mode key once again and the parameter changes to another parameter,           
and pressing the MODE Key for more than 2 seconds ends Parameter Setting            
Mode,andreturnstoNormalstatus.
■ ShiftKey:
- MovesthedecimalpointofsettingdataineachMODE.
- PressShiftKeyforover6secondsandchangestoFactorySettingMode.
■ IncreasesettingvalueKey:Increaseset-valueofeachdecimalpoint





 