Owner manual

Operation manual
SEA Series Steam Sterilizers
13
8.System setup
DATE
TIME
PRINTER
LANGUAGE
DATE SETUP
YEAR
MONTH
DAY
TIME SETUP
HOUR
MINUTE
PRINTER SETUP
ON
OFF
Fig8-1
Fig8-2
Fig8-3
Fig8-4
Press MENU/C key for 3 seconds on ready state and the autoclave
will enter into system setup (See Fig 8 -1).
Press STEP key and DRY key to select
and press OK key to enter sub-menu for setup system.
Press MENU/C key to cancel and return to main menu.
8.1 Date setup
With 3 sub-menus (Fig 8 - 2).
Press STEP and DRY key to select.
Press OK key enter this sub-menu.
Press STEP and DRY key to setup the valve.
Press OK key to save the setup and return to upper level of the menu.
Press MENU/C key to return to upper level of menu without
saving setup.
8.2 Time setup
With 2 sub-menus (Fig 8 -3).
Press STEP and DRY to select sub-menu.
Press OK key to enter this sub-menu.
Press STEP and dry key to insert value.
Press OK key to save the setup and return to upper level of the menu.
Press MENU/C key to return to upper level of menu without saving setup.
8.3 Printer setup
Press STEP and DRY key to select ON or OFF (See Fig 8-4)
Press OK key to save the setup and return to upper level of the menu.
Press MENU/C key to return to upper level of menu without saving
setup.