Manual

Using the WaterPro® BT System
32
Dispensing
DISPENSING mode is displayed when
Product Water is being dispensed.
DIS
PENSING mode occurs because the
Dispensing Button was pressed down.
The
Distribution Pump turns on.
The resistivity and temperature of the
Product Water is displayed during
dispensing. The resistivity and temperature
remain displayed for up to 10 seconds after
dispensing is stopped.
Auto
-Dispensing
AUTO
-DISPENSING mode is displayed
when
selecting menu option F01.
AUTO
-DISPENSING mode is used to
dispense pre
-
set volumes of water from the
WaterPro®
BT System. The Distribution
Pump turns on.
The am
ount of water dispensed and the
resistivity are shown while water is being
dispensed. The resistivity remains displayed
for up to 10 seconds after dispensing is
stopped.