Manual

Installation
11
2
For system installed under
a counter pass the tubing through a hole
provided in the counter.
•
Cut the tie wrap attaching the tubing and cables.
•
Connect the tubing from the remote dispenser to the water system:
black tubing to the black tubing, and transparent tubing to the
transparent tubing.
3
•
Connect the 2 electrical connectors (Molex + Picoflex) to the PC
Board.
4
•
Make sure the system operates correctly before installing the cover
panel. (It will not be possible to remove once attached).
5
•
Install the cover panel.
6
•
Secure the cover with screw provided by inserting the screw
through
the top of the cover and tightening it to the top of the panel.