Manual

7
Installation
Preparation of the System
A
•
Open the front cover (this may require removal of the final filter).
Locate the tie wrap used to hold the Booster Pump in place during
shipping (A).
B
•
Press on the tab of the tie wrap. Remove and pull the tie wrap out.
C
•
Locate the protective foam found at the UV lamp cable.
Remove it and discard.
Connection of Tubing for a WaterPro® BT System
A
•
Rotate the WaterPro® BT System so you can see the back of the
system (see photo A).
1. Feedwater tubing
2. Reject tubing
3. Overflow tubing
4. Tank outlet