User guide

Using the WaterPro® BT System
26
RO Water Using the Tank Outlet Valve
A
TANK OUTLET VALVE
•
On a WaterPro®
BT (UV) System: RO Water is obtained from the Tank
Outlet. Open the Tank Outlet Valve when RO Water is needed (A).
How to Dispense an Exact Amount of Product Water (F01)
1
Press the
Main and “-“ Buttons
together to enter the menu. The
Display will show F01.
2
Press the “+” or “
-“ Button to adjust
the exact amount of Product Water
(in
Liters) needed. Pre-set volumes
of water can be adjusted from 0.25 L
to 9.75 L
in 0.25 increments.
NOTE:
The accuracy of this is
dependent upon the accuracy of the
Flow Calibration performed in
Section
How to Calibrate the
Flowrate from the
WaterPro® BT
System (F02)
.