User guide

Installation
15
Purging Air from the System
A
•
At this time you should have installed the
Filter Pack
cartridge,
Barbed Fitting and the
Clear Tubing. Air trapped in the
Filter Pack
cartridge
should now be purged from the system.
•
Verify that you have a full tank of RO water by viewing the Tank
Level display
.
B
•
Press the Dispensing Button once to put the system into
DISPENSING mode
.
C
•
Dispense water from the system to the 60% level (approximately
3.6L)
.
•
The system will go into FILLING TANK mode when the tank level is
below
the 60% level.
•
When the tank level reaches the minimum level, the system will
finish dispensing water.