Manual

Product Service 1-800-522-7658

CHAPTER 5

APPROPRIATE

APPLICATIONS FOR YOUR

VERTICAL CLEAN BENCH

Now that the installation of your Vertical Clean Bench is completed, you are ready to

use it. Read this chapter to learn about:

1. Routine Daily Work Procedures.

2. Suitable Applications.

3. Appropriate HEPA Filter Applications, Suitability and Guidelines.

Routine Daily Work Procedures

Planning

 Arrange for minimal disruptions, such as room traffic or entry into the

room while the Clean Bench is in use.

Start-up

 Turn on blower and light. Turn off the UV light and remove the UV

closure panel, if equipped.

 Only raise the sash for loading and cleaning.

 Allow the Clean Bench blower to operate unobstructed for 1 minute.

 Wear a long sleeved lab coat, rubber gloves and protective eyewear. Wear

a protective mask if appropriate. Consult your Safety Officer for additional

personal protective equipment recommendations.

 Wipe down interior surfaces with a mild household detergent or

disinfectant. DO NOT use abrasive cleaners, bleach or solvents.