Owner manual

Chapter 3: Getting Started
Product Service 1-800-522-7658
12
Original Instructions
Installing the Purifier Clean Bench on a
Labconco Base Stand
Labconco offers a variety of accessory base stands in a number of different
configurations to suit your particular needs. Stands can be ordered with preset
telescoping legs, or with a manually or electrically adjustable variable height
stand.
Telescoping Base Stands
These stands are available with either fixed feet or caster wheels. The user sets
the height of these stands before installation of the Clean Bench. The height can
be set at 27.5 to 34.5 inches in 1-inch intervals, giving a work surface height of
28.75 to 35.75 inches. The Base Stands for each Clean Bench model are listed in
Table 3-1 below.
Width
Clean
Bench
Model #
Base Stand
w/Feet
Model #
Base Stand
w/wheels
Model #
3' 38897 3613200 3613201
4' 38884 3888700 3888701
5' 32500 3255000 3255001
6' 38730 3857700 3857701
8' 38185 3857300 3857301
For further information regarding Telescoping Base Stands or other accessories,
please contact Labconco’s Customer Service Department at 1-800-821-5525 or
816-333-8811 weekdays, between the hours of 7:00 a.m. and 6:00 p.m. CST.
1. Before positioning the Telescoping Base Stand in its final location, decide the
final height of the stand. The height of the work surface can be raised in one-
inch increments from 28.75 to 34.75 inches.
Table 3-1