Instruction Manual

Chapter 7: Accessorizing Your Glove Box

Product Service 1-800-522-7658

21. Drying Train Tubing Kit

Includes the (FEP) tubing and connections required for connecting

typical drying train components such as moisture, oxygen, and other

gases. Fluorinated ethylene-propylene (FEP) tubing has very low

moisture absorption.

Part # Descriptions

5242500 Drying Train Tubing Kit; moisture, solvents and radioisotopes

5242501 Drying Train Tubing Kit; oxygen and moisture only

22. Gas and Vacuum 0.2 Micron Filter (Part #5240100)

Used for removal of particulates in a drying train, vacuum pump

exhaust or inert gas line. 0.25"-0.38" ID tube connection with

additional fittings for attachment to 0.50" ID hose.

23. External Glove Port Covers (Part #5242200)

Cap and clamp attaches to the glove ports to eliminate glove inflation

during purging and filling operations and reduce the cycle time of the

purging/filling process. Sold as a set of two.

24. Interior Glove Port Cover (Part #5060400)

Quickly seals glove box should sudden leak occur due to glove

damage. Stainless steel with molded rubber gasket and spring-loaded

latches with adjustable closure knob.

25. Interior Shelves (Part #5061600)

Provide shelf space across back wall of glove box interior. Three

stainless steel storage shelves are attached to epoxy-coated steel

upright supports. Shelves have adjustable height and measure 30"

wide x 6" deep. Installation hardware and instructions included.

26. Gloves (see Appendix A: Replacement Part numbers for other

glove sizes and material types)

Neoprene gloves are the most resistant to abrasion and tearing. Butyl

gloves provide higher impermeability and improved dexterity.

Hypalon gloves are made with a mixture of neoprene and butyl rubber

to provide an intermediate level of neoprene and butyl features.

27. Left Side Sealed Electrical Plug Kit (see Part #’s below)

Part # Descriptions

5075622 115V single outlet

5075623 230V IEC single outlet

28. Vacuum Line HEPA Filter and Housing

Part # Descriptions

5441400 Housing for HEPA Filter and connections

5441401 HEPA Filter, Round 99.99% efficient on 0.3 micron

5441403 Pressure Relief Bubbler Room Exhaust Kit for HEPA filtration