Manual

Chapter 7: Accessorizing Your Glove Box

Product Service 1-800-522-7658

separately. This kit can be used if additional valves are desired or

valves are added to the Precise Basic Glove Box. For a complete

installation of six valves, mounting brackets, pressure relief valve,

and labels for the Precise Basic Glove Box, order Full Valve Kit

#5232101. All valves require a 0.688" (17.5mm) diameter hole to be

drilled for mounting.

7. Vacuum Aspirator Kit

Includes the valve, hose, canister, and vacuum pump for evacuating

fluids around the work surface.

Part # Descriptions

5241800 Vacuum Aspirator Kit, 115V

5241801 Vacuum Aspirator Kit, 230V International

8. Electrical Power Strips

These convenience electrical power strips are available in US and

international versions and plug into the interior duplex of the glove

box.

Part # Descriptions

5211500 US Power Strip 115V, 4 Position, 5A

5210600 UK Power Strip 250V, 6 Position, 2A

5290400 European Power Strip 250V, 4 Position, 2A

5332600 Australian Power Strip 250V, 6 Position, 2A

5211501 Installation Tool

9. Electrical 9 Pin Sealed Pass-Through Kit (Part #5075619)

Includes sealed 9 pin (D-subminiature with male pins on one side and

female pins on the other) connector and cord for data transfer to a

typical printer outside the glove box from the balance. Note: Order

the 9 pin installation kit separately which includes all the drill bits and

hole saws for field installation (Part #5241100).

10. Remote Blowers and Dampers for Exhausting the Pressure Relief

Valve and/or Vacuum Pump

Has a 1/4 hp direct drive motor and corrosion-resistant epoxy-coated

steel housing and wheel with blower inlet of 6.00" ID. Outlet

dimensions are 4.25" x 7.38" OD. Dampers allow airflow adjustment

for blowers.

CFM @ Static Pressure-Inches of H

S.P. 0.0" 0.125" 0.25" 0.50" 0.75" 0.87"

CFM 595 560 515 420 300 167

Part # Description

4863500 Remote Blower, 115 V, 60 Hz. 4.4 amps

4863501 Remote Blower, 115/230 V, 50 Hz, 5.6/2.8 amps International

3924000 6" Epoxy-Coated Steel In-Line Adjustable Damper

4724200 6" PVC In-Line Adjustable Damper