Safety Cabinets 34609 Series User Manual

Appendix D: Accessories
Product Service 1-800-522-7658
66
*Postfilter Conversion Kit
These kits allow the retrofitting of carbon postfilters in Logic cabinets that
originally did not have this option.
Catalog # For use with Shipping Weight
3859301 4-foot Purifier Cell Logic 5 lbs. (2.3 kg)
3859302 5-foot Purifier Cell Logic 5 lbs. (2.3 kg)
3859303 6-foot Purifier Cell Logic 5 lbs. (2.3 kg)
*Canopy Connection Kit
Contains the transition for thimble ducting the Biosafety Cabinet Logic
Series Cabinets to a 10-inch diameter stainless steel duct.
Catalog # For use with Duct Dia. Shipping Weight
3898000 3-foot Purifier Cell Logic 10" 15 lbs. (7 kg)
3898001 4-foot Purifier Cell Logic 10" 15 lbs. (7 kg)
3898002 5-foot Purifier Cell Logic 10" 15 lbs. (7 kg)
3898003 6-foot Purifier Cell Logic 10" 15 lbs. (7 kg)
*Air-Tight Damper (# 3776800)
The 10-inch diameter stainless steel damper mounts atop the Canopy
Connection Kit to adjust exhaust airflow. Shipping weight 13.0 lbs. (5.9 kg).
NOTE: This damper IS NOT prepared for the installation of the canopy
alarm sensor. If you want a canopy airflow sensor, order #3859700, listed
below.
*Backdraft Damper (# 3858800)
The backdraft damper mounts in a vertical run of duct to prevent the reverse
pressurization of the exhaust system. Sized for 10-inch diameter ductwork.
Shipping weight 5.0 lbs. (2.3 kg).
*Remote Blowers
Labconco offers a full line of epoxy-coated steel remote exhaust blowers for
use with its Biosafety Cabinets. Please contact Labconco’s Customer Service
Department at 800-821-5525 for assistance with blower selection and sizing.