Data Sheet

Schematic Capture
71
4. Repeat the process down the left hand side of the component graphic using the
completed screenshot as a reference. Right click to finish placement.
5. Click on the X-Mirror icon to point the pin in the opposite direction ready for placement
down the right hand side.
6. Repeat as of stage 3 to place the pins down the right hand side of the component.
7. Right click the mouse when you are finished to exit pin placement mode.
The Plus (+) and Minus (-) keys can also rotate the pin during placement, but you
will find that when adding pin numbers, they will be on the opposite side of the pins
that you placed before rotation. In this case right click on the pin(s) affected and
click the Y-Mirror option to correct the pin(s).
At this stage your component graphics should look something like the following: