Data Sheet

Schematic Capture
25
Armed with the above you should now be able to connect up all of the circuitry, so that your
schematic now looks something like the following
Schematic section with all parts / terminals placed
Remember, Proteus provides visual indicators to help you. If the cursor turns green
you can start/stop wire placement.
Connectivity by Touch
The following basic rules of thumb may be helpful:
Iif you are placing the component you can attach to another component, wire or terminal
directly.
If you are dragging the component you can attach to another component pin, junction dot or
terminal.
If you are copy and pasting you can only attach it to a pin end, a bus pin, a junction dot or a
terminal only.
Making Connections with Terminals
The final thing we need to do to complete this block of circuitry is label the terminals. Terminal
naming is extremely important as it denotes the connection to be made. We could name the
terminals in any fashion we liked but sensible names make the schematic more legible and
easy to understand.