Data Sheet

LABCENTER ELECTRONICS LTD.

methods to find and select the parts into your design. When you are finished you should have

all of the required components in the Object Selector as shown in the following screenshot.

A Full list of required components

For example, if you wanted to search for a specific stockcode you would need to make sure that

the stockcode column was enabled (right click on results list) and then type something like ‘digi

<stockcode>’ to locate the digikey stockcode.

Similarly, if you want to search through only your own library parts, you can simple enable the

library field and then type something like ‘user <partname>’; the user term will filter the results to

the USERDVC library thus reducing the search range to your own libraries.

It is inevitable that at some point there will be parts needed for a project which

aren't supplied in the installed libraries. In such cases you can quickly download

and import the parts free of charge from popular third party vendors such as Ultra-

Librarian, SnapEDA, Library Loader or PCB Library Expert. The process is

discussed in detail in the reference manual and also covered in video format on the

website and our Youtube channel.