Data Sheet

LABCENTER ELECTRONICS LTD.
148
Undo and Redo icons
If you click on undo while in the PCB Layout tab but the undo action applies to the schematic
you will be prompted to confirm the operation. In our case, we do want to bring back the
connector so accept the prompt to return the PCB to the original state.
This is a simple example of a change which affects objects already placed on the layout. The
important thing to remember is that while the netlist is live, you must manually confirm any
change which affects the connectivity of objects you have already placed.
Batch Netlisting
If you prefer, live netlisting can be turned off and a more traditional batch mode netlist used.
This is controlled from the 'live netlist' toggle on the Tools menu (in the PCB module).