Data Sheet

Schematic Capture
3
Similarly, we need a layout so check the box at the top of the layout page and again choose the
default template.
The next screen allows us to define the layer stack for our PCB. Since we will be designing a
simple two layer board there is no configuration necessary here.
For multi-layer PCB's the stackup wizard button would be used to define the
number of copper layers, cores and pre-preg's. This is discussed in more detail in
the accompanying PCB tutorial.
The next screen is for configuration of drill spans. Again, for our proposed 2-layer board the only
possibility is thru-hole so there is no action required.