Data Sheet

LABCENTER ELECTRONICS LTD.

Select Delete from the context menu

Complex board edges can be directly imported onto the board edge layer using the

Import DXF function on the File Menu.

Layer Stackup and Drill Spans

Before we begin layout, we need to define our layer stackup and specify which drill ranges are

valid for vias. Start by launching the layer stackup dialogue from the Technology menu.

We will be making a simple two-layer board with a single core between top copper and bottom

copper. This will be shown visually on the editable grid and as a cross section in the board view

tab.

Since the defaults are fine for us, there is no action required here. If we did want to edit the

stackup then we would do so via the stackup wizard button which would allow us to change the

number of copper layers and the construction method for the board.