User's Manual

a
Reset
RESET
RESET A / CHANNEL RESET:
To reset learned channels to channels last set in Utility, hold TEST on power up. LED blinks
green twice to indicate reset. Release TEST. Advanced features set via Utility are retained.
RESET B / FACTORY DEFAULTS:
To reset all advanced features and channels to FACTORY DEFAULTS, hold TEST on power up
for longer than 10 seconds. When LED blinks green 4 times, release.
•
All settings may be congured using the PocketWizard Utility available from
www.PocketWizard.com See the online extended documentation or the help text in the
Utility for detailed descriptions of these settings.
Factory defaults
Channel
C.1 = ControlTL channel 1, Standard channel 1
C.2 = ControlTL channel 2, Standard channel 2
Use ControlTL for Rx Channel = enabled
(For FlexTT5 Only)
Modeling
Non-Speedlight Modeling Light Mode = Camera Wake
Modeling Light Active Autotrack = enabled
Modeling Light Active = 100% (inactive due to Autotrack setting)
Modeling Light Sleep = 10%
Modeling Light Delayed Sleep = enabled
Modeling Light Delay After Camera Sleeps = 30 secs.