User's Manual

Basic Wireless i-TTL: MiniTT1 FlexTT5
No ash on Camera
1. Slide MiniTT1 Transmitter onto camera.
2. Slide Speedlight onto remote FlexTT5 Transceiver. Set the Speedlight for standard i-TTL
mode (not REMOTE or MASTER). Repeat for each remote Speedlight. All remote i-TTL
Speedlights will be treated as one zone of light.
3. Make sure all your PocketWizard radios are on the same channel and take pictures normally.
This mode is like using the SU-800 in TTL Commander mode, or the SB-800 or SB-900 as
MASTER in Advanced Wireless Lighting TTL Mode with master ash cancelled and remote
group A selected as TTL with 0.0 FEC.
Basic Wireless i-TTL: MiniTT1 FlexTT5
Flash on Camera
1. Slide MiniTT1 Transmitter onto camera.
2. Slide Nikon Speedlight onto MiniTT1 radio. Set the Speedlight for standard i-TTL mode.
3. Slide Speedlight onto remote FlexTT5 Transceiver. Set the Speedlight for standard i-TTL
mode (not REMOTE or MASTER). Repeat for each remote Speedlight. All remote i-TTL
Speedlights will be treated as one zone of light.
4. Make sure all PocketWizard radios are on the same channel and take pictures normally.
i-TTL