User's Manual

Specications

Trigger Delay: = 0 seconds – “faster than a wire” when using compatible Nikon cameras,

approximately 900 microseconds in Basic Trigger Mode

Batteries:

FlexTT5 - 2 x AA (IEC:LR6) 60 hours

MiniTT1 - CR2450 or CR2354:

• Approximately 30 hours of camera awake time, varies with camera and Speedlight models.

• Low temperature operation and used batteries will have reduced battery life. Always

use fresh batteries when working in the cold.

• Basic Trigger Mode consumes the battery more quickly and is not recommended when

using the MiniTT1 for Nikon on a Nikon camera.

Maximum FPS: Up to 12 (varies with camera; i-TTL usage reduces FPS)

Operating Temperature: Above -15º C (5º F) and below 50º C (120º F) for FlexTT5

Above -12º C (10º F) and below 50º C (120º F) for MiniTT1

• Low temperature affects coin cell performance. Always use

fresh batteries in cold temperatures.

Storage Temperature (without battery): Above -30º C (-22º F) and below 85º C (185º F)

Compatibility

This MiniTT1/FlexTT5 is compatible with most Nikon i-TTL compatible cameras and

Speedlights. Visit PocketWizard.com for compatibility information specic to your cameras

and Speedlights. Some features may not be available or may be implemented via rmware

updates to your MiniTT1 and FlexTT5. i-TTL for DSLRs only (not for D-TTL or lm TTL).