Data Sheet

WWW . L A B G R U P P E N . C O M
Front Panel Interface
The front panel is the “local control center” for the PLM+. An intuitive,
menu driven interface allows quick access to key functions using the
moisture resistant silicone touchpad. Information is clearly displayed
on the daylight-readable, 2.5-inch LCD panel. The soft-button keypad
and precision rotary encoder provide control of processing and
Connectivity
XLR-F connectors with switchable Iso-Float, 4 channels of AES/EBU
across 2 x XLR-F connectors, 2 x etherCON for linking or redundancy.
A 32 amp powerCON connector (16 amp locking IEC for 5K44)
is used for mains supply.
The PLM 20K44 and 12K44 are available with either binding posts
or an ‘embedded patch panel’ with Neutrik speakON connectors
(2 x NLT4 and 1 x NLT8). The 5K44 is equipped with both binding
posts and speakON connectors (4x NLT4). Common connectors
include: 4 x analog inputs across 4 x
Speaker outputs
“Embedded patch panel” with Neutrik speakON
connectors (2 x NLT4 and 1 x NLT8)
32 amp locking powerCON for mains supplyTwo AES3 digital inputs (4 audio channels)
4 x binding posts (pairs)
Analog inputs with Iso-Float
Four “Lake class” analog inputs with Iso-Float
ground isolation
EtherCON inputs
Two etherCON jacks are provided for the dual
redundant control and Dante connections
Speaker outputs
“Embedded patch panel” with Neutrik speakON
connectors (4 x NLT4)
16 amp locking IEC for mains supply