Data Sheet

WWW . L A B G R U P P E N . C O M
Specifications
General
LUCIA 240/1-70 LUCIA 120/1-70
Number of powered channels
1 1
Total output all channels driven
240 W 120 W
Max output voltage
100 V peak 100 V peak
Max. output current
7 Arms 3.5 Arms
Performance
70 V
240 W 120 W
100 V
1)
120 W 60 W
Signal-to-noise ratio
>100 dBA >100 dBA
16 ohms
240 W 120 W
Gain, Sensitivity and Limiters
VPL
100 V peak 100 V peak
Sensitivity, balanced input
4 dBu / 1.23 Vrms 4 dBu / 1.23 Vrms
Sensitivity, RCA input
-2 dBu / 0.62 Vrms -2 dBu / 0.62 Vrms
Input headroom for clip, balanced
2)
12 dBu / 3.09 Vrms 12 dBu / 3.09 Vrms
Input headroom for clip, RCA
2)
6 dBu / 1.55 Vrms 6 dBu / 1.55 Vrms
Connectors and buttons
Input connectors (per ch.)
3-pin detachable screw terminals, electronically balanced
Input connectors (ch 1 & 2)
Unbalanced RCA type
Output connector
2-pin detachable screw terminal
GPI (power control input)
3)
2 channels of voltage sense type 4 pins in a detachable screw terminal. Default functionality is output level for GPI1 and
wake up from stand by for GPI2
GPO (power state output)
3)
Contact closure type, 2 pins in a detachable screw terminal. Default for external monitoring of fault/protection/power off
RS232
Can be controlled and monitored by third parties via RS232 using both the GPI pins
High pass filter
This filter is in series with the other filters in the DSP and is controlled with switches on the back.
Settings OFF / 50 Hz / 80 Hz
USB
Cooling
stays below 12 W and the surrounding temperature is below 25 degrees C
Auto mode
The power state is controlled automatically with the audio signal
Level adjustment (per channel)
Front panel potentiometer, detented from -inf to 0 dB
Processing features
Input processing block
4)
4 EQ sections per input
Mix matrix routing block
4)
2 in - 1 out mix-matrix controllable from GPI
Output processing block
4)
4 EQ sections per output (presets available for many loudspeakers)
User adjustable output look ahead limiter
ADLC (Adap
tive ISO 226 compensation)
Latency from any input to output
User adjustable from 9.15 to 137 ms
Power
Nominal voltage
100 - 240 VAC
Operating voltage
85 - 265 VAC
Standby consumption
<1 W
Mains connector
IEC inlet
Dimensions
W: 216 mm (8.5”), H: 44 mm (1.7”), D: 280 mm (11”)
Weight
1.9 kg (4.2 lbs.)
Finish
Black aluminum front and black steel chassis
Approvals
CE, CSA, CCC, PSE, FCC, ENERGY STAR
Note 1): The peak voltage is 100 V, but the look-ahead limiter solution ensures that it cannot clip, so in real life use with music or speech it will typically be able to sustain a higher SPL in
Note 2): An analog soft limit will be engaged on the input above this level to reduce the clip distortion
Note 3):
Note 4):
All specifications are subject to change without notice.
Item no. TDS-LUCIA170_V3 - 09.25.2017