Data Sheet

WWW.LABGRUPPEN.COM

Optional Accessories

LUCIA: Localized Utility Compact Intelligent Ampliﬁcation

LUCIA Optional Accessories

Rack Mount Kit

Part Number: 990692002

The Rack Mount Kit enables mounting of one or two LUCIA ampliﬁer

units in 1U of a standard 19” equipment rack. Mounting is quickly

accomplished by removal of the front faceplate of the LUCIA unit(s)

and reinstalling with the included M3 x 10mm machine screws. It is

permissible to mount LUCIA units or other equipment directly above or

below rack-mounted LUCIA units; however, allowing 1U space above

or below will allow higher power output in silent or whisper mode.

Possible extra LUCIA

Assembly Instructions

1. Remove the two TORX screws holding the decorative outer rim

of the front plate.

2. Place the ampliﬁer on top of the rack mount according to the

drawing opposite.

3. Replace the decorative outer rim of the front plate in front of the

rack part.

4. Reassemble the front, rack mount and ampliﬁer by use of two

of the M3 x 10 mm length machine screws (A) supplied as

accessories with the LUCIA ampliﬁer.

5. In the side of the rack mount, ﬁx the third of the M3 x 10 mm length

machine screws (A) supplied as acceossories with the LUCIA

ampliﬁer.

6. If two ampliﬁers are placed on the rack mount - please repeat

assembly instructions 1 to 5 for the other ampliﬁer.

Attention

Do not use the rack mount for other equipment, as this could

overload the mount and make it unsafe. It is recommended to leave

a one unit high rack space empty - either above or below the LUCIA

ampliﬁer rack.